دانشمند جوان هراتی جزو برجسته ترین دانشمندان کشور

رزومه علمی پروفسور محمدرضا سلیم پور

تحصیلات دانشگاهی:

دوره دکتري (1386-1382)

رشته: مهندسي مکانيک ـ تبديل انرژي

محل تحصيل: دانشکده مهندسي مکانيک، دانشکده‌ فني، دانشگاه تهران

دوره کارشناسي ارشد (1382-1380)

رشته: مهندسي مکانيک ـ تبديل انرژي

محل تحصيل: دانشکده مهندسي مکانيک، دانشکده فني، دانشگاه تهران

دوره کارشناسي (1380-1376)

رشته: مهندسي مکانيک ـ حرارت و سيالات

محل تحصيل: دانشکده مهندسي مکانيک، دانشکده فني، دانشگاه تهران

چند نمونه از نشریات معتبری که اخیراداوری مقالات آنها را انجام داده اند.

- International Journal of Heat and Mass Transfer

- International Journal of Thermal Sciences

- International Communications in Heat and Mass Transfer

- Heat and Mass Transfer

- Applied Thermal Engineering

- Experimental Thermal and Fluid Sciences

- Heat Transfer Engineering

- Progress in Computational Fluid Dynamics

- Iranian Journal of Science and Technology

سوابق اجرایی:

مسئول ارتباط با صنعت دانشکده مکانیک

1390-1395 سرپرست تحصیلات تکمیلی دانشکده مکانیک

1391-1392

معاون پژوهشی دانشکده مکانیک

مقالات ISI:

M. Kashcooli, M. R. Salimpour, E. Shirani, "Heat transfer analysis of skin during thermal therapy using thermal wave equation", Journal of Thermal Biology, 64

· (2017) 7–18.

· A. Torabi, S. Akbarzadeh, M. R. Salimpour, "Comparison of tribological performance of roller follower and flat follower under mixed elastohydrodynamic lubrication regime", Proc. IMechE Part J: Journal of Engineering Tribology, Accepted Manuscript, In Press.

· M. R. Salimpour, A. Shahmoradi, D. Khoeini, "Experimental study of condensation heat transfer of R-404A in helically coiled tubes", International Journal of Refrigeration, 74 (2017) 582-589.

· M. Mahmoudi, M. R. Tavakoli, M. A. Mirsoleimani, A. Gholami, M. R. Salimpour, "Experimental and numerical investigation on forced convection heat transfer and pressure drop in helically coiled pipes using TiO2/water nanofluid', International Journal of Refrigeration, 74 (2017) 625-641.

· M. R. Salimpour, R. Kalbasi, G. Lorenzini, "Constructal multi-scale structure of PCM-based heat sinks", Continuum Mechanics and Thermodynamics, Accepted Manuscript, In Press.

· M. Farzaneh, M. R. Tavakoli, M. R. Salimpour, "Effect of reverting channels on heat transfer performance of microchannels with different geometries", Journal of Applied Fluid Mechanics, 10 (1) (2017)41-53.

· N. Bahadormanesh, M. R. Salimpour, "Constructal design of high-emissivity radiation inserts embedded in a disk-shaped heat generation body", Applied Thermal Engineering, 112 (2017) 638–648.

· A. Abdollahi, M. R. Salimpour, N. Etesami, "Experimental analysis of magnetic field effect on the pool boiling heat transfer of a ferrofluid", Applied Thermal Engineering, 111 (2017) 1101–1110.

· S. Yarmohammadi, M. Farhadi, H. Hajimiri, M. R. Salimpour, "Multi-objective optimization of R-404A vapor condensation in swirling flow using genetic algorithms", Heat Transfer Engineering, 38 (2) (2017) 137-148.

· A. Abdollahi, M. R. Salimpour, " Experimental investigation of the boiling heat transfer of nanofluids on a flat plate in presence of magnetic field", The European Physical Journal Plus, 131 (11) (2016) 414.

· M. Farzaneh, M. R. Salimpour, M. R. Tavakoli, "Design of bifurcating microchannels with/without loops for cooling of square-shaped electronic components", Applied Thermal Engineering, 108 (2016) 581–595.

· M. Mardani, M. R. Salimpour, "Optimization of triangular microchannel heat sinks using constructal theory", Journal of Mechanical Science and Technology, 30 (10) (2016) 4757-4764.

· A. Shahsavar, M. Saghafian, M. R. Salimpour, M. B. Shafii, "Experimental investigation on laminar forced convection heat transfer of ferrofluid loaded with carbon nanotubes under constant and alternating magnetic fields", Experimental Thermal and Fluid Science, 76 (2016) 1-11.

· M. Monfared, E. Shirani, M. R. Salimpour, F. Aloui, "Numerical and experimental study on the flow history effects of axial flow on the Couette-Taylor flow", Acta Mechanica, 227 (7) (2016) 1999–2010.

· A. Shahsavar, M. Saghafian, M. R. Salimpour, M. B. Shafii, "Effect of temperature and concentration on thermal conductivity and viscosity of ferrofluid loaded with carbon nanotubes", Heat and Mass Transfer, 52 (10) (2016) 2293-2301.

· A. Shadlaghani, M. R. Tavakoli, M. Farzaneh, M. R. Salimpour, "Optimization of triangular fins with/without longitudinal perforate for thermal performance enhancement", Journal of Mechanical Science and Technology, 30 (4) (2016) 1903-1910.

· A. Torabi, S. Akbarzadeh, M. R. Salimpour, "Mixed thermo elastohydrodynamic lubrication analysis of finite length cam and follower mechanism", Journal of Mechanical Science and Technology, 30 (3) (2016) 1295-1303.

· A. Shahsavar, M. R. Salimpour, M. Saghafian, M. B. Shafii, "Effect of magnetic field on thermal conductivity and viscosity of a magnetic nanofluid loaded with carbon nanotubes", Journal of Mechanical Science and Technology, 30 (2) (2016) 809-815.

· R. Nasehi, A. Alamatsaz, M. R. Salimpour, "Using multi-shell phase change materials layers for cooling a lithium-ion battery", Thermal Science, 20 (2) (2016) 391-403.

· A. Shahsavar, M. R. Salimpour, M. Saghafian, M. B. Shafii, "An experimental study on the effect of ultrasonication on thermal conductivity of ferrofluid loaded with carbon nanotubes", Thermochimica Acta, 617 (2015) 102–110.

· R. Kalbasi, M. R. Salimpour, "Constructal design of horizontal fins to improve the performance of phase change material rectangular enclosures", Applied Thermal Engineering, 91 (2015) 234-244.

· M. R. Salimpour, K. Golmohammadi, A. Sedaghat, A. Campo, "Experimental Study of Turbulent Convective Heat Transfer of Titanium Oxide Nanofluid Flowing inside Helically Corrugated Tubes", Journal of Mechanical Science and Technology, 29 (9) (2015) 4011-4016.

· R. Kalbasi, M. R. Salimpour, "Constructal Design of Phase Change Material Enclosures used for Cooling Electronic Devices", Applied Thermal Engineering, 84 (2015) 339-349.

· M. R. Salimpour, A. Menbari, "Analytical Optimization of Constructal Channels used for Cooling a Ring Shaped Body Based on Minimum Flow and Thermal Resistances", Energy, 81 (2015) 645-651.

· M. R. S. Bushehri, H. Ramin, M. R. Salimpour, "A New Coupling Method for Slip-Flow and Conjugate Heat Transfer in a Parallel Plate Micro Heat Sink", International Journal of Thermal Sciences, 89 (2015) 174-184.

· M. R. Salimpour, A. Dehshiri-Parizi, "Convective Heat Transfer of Nanofluid Flow through Conduits with Different Cross Sectional Shapes", Journal of Mechanical Science and Technology, 29 (2) (2015) 707-713.

· M. Arbaban, M. R. Salimpour, "Enhancement of Laminar Natural Convective Heat Transfer in Concentric Annuli with Radial Fins using Nanofluids", Heat and Mass Transfer, 51 (2015) 353-362.

· M. S. Razavi, E. Shirani, M. R. Salimpour, G. S. Kassab, "Constructal Law of Vascular Trees for Facilitation of Flow", PLoS ONE, 9 (12) (2014) e116260.

· M. Zare, M. Daneshi, E. Shirani, M. R. Salimpour, "A Novel Approach for Prediction of 3-D Skin Structure Burning with Embedded Branched Vasculature", International Journal of Heat and Mass Transfer, 78 (2014) 468-480.

· M. R. Salimpour, A. Menbari, "Constructal Design of Cooling Channels Embedded in a Ring-Shaped Heat Generating Body", Energy, 73 (2014) 302-310.

· S. Mahjoub, M. R. Salimpour, H. Shokouhmand, Z. Bahrami, "Entropy Generation Analysis in an Evaporative Air-Cooled Heat Exchanger", Journal of Thermal Science and Technology,9 (1) (2014) jtst0004.

· M. S. Razavi, E. Shirani, M. R. Salimpour, "Development of a General Method for Obtaining the Geometry of Microfluidic Networks", AIP Advances, 4 (2014) 017109.

· H. Shokouhmand, S. Mahjoub, M. R. Salimpour, "Constructal Design of Finned Tubes used in Air-Cooled Heat Exchangers", Journal of Mechanical Science and Technology, 28 (6) (2014) 2385-2391.

· M. R. Salimpour, H. Gholami, "Effect of Inserting Coiled Wires on Pressure Drop of R-404A Condensation", International Journal of Refrigeration, 40 (2014) 24-30.

· M. Zareh, H. Shokouhmand, M. R. Salimpour, M. Taeibi, "Numerical Simulation and Experimental Analysis of Refrigerants Flow through Adiabatic Helical Capillary Tube", International Journal of Refrigeration, 38 (2014) 299-309.

· M.R. Hajmohammadi, M.R. Salimpour, M. Saber, A. Campo, "Detailed Analysis for the Cooling Performance Enhancement of a Heat Source under a Thick Plate", Energy Conversion and Management, 76 (2013) 691-700.

· A. Campo, M. R. Salimpour, J. Ho, "The Method of Lines with Numerical Differentiation of the Temperature-Time Histories for a Facile Solution of 1-D Inverse Heat Conduction Problems", Heat and Mass Transfer, 49 (2013) 369-379.

· M. Daneshi, M. Zare, M. R. Salimpour, "Micro and Nano-Scale Conductive Tree-Structures for Cooling a Disk-Shaped Electronic Piece", Journal of Heat Transfer, ASME Transactions, 135 (2013) 031401.

· M. R. Salimpour, M. Sharifhasan, E. Shirani, "Constructal Optimization of Micro-Channel Heat Sinks with Non-Circular Cross-Sections", Heat Transfer Engineering, 34 (10) (2013) 863-874.

· M. R. Salimpour, F. Sharifi, D. Menbari, "Constructal Design for Cooling a Disc-Shaped Body Using Incomplete Inserts with Temperature-Dependent Thermal Conductivities", Proc. IMechE Part E: Journal of Process Mechanical Engineering, 227 (4) (2013) 231–242.

· M. R. Salimpour, S. Yarmohammadi, "Heat Transfer Enhancement during R-404A Vapor Condensation in Swirling Flow", International Journal of Refrigeration, 35 (7) (2012) 2014-2021.

· A. Mazloomi, F. Sharifi, M. R. Salimpour, A. Moosavi, "Optimization of Highly Conductive Insert Architecture for Cooling a Rectangular Chip", International Communications in Heat and Mass Transfer, 39 (2012) 1265-1271.

· M. R. Hajmohammadi, E. Shirani, M. R. Salimpour, A. Campo, "Constructal Placement of Unequal Heat Sources on a Plate Cooled by Laminar Forced Convection", International Journal of Thermal Sciences, 60 (2012) 13-22.

· M. R. Salimpour, M. A. Zahedi, "Proposing a Novel Combined Cycle for Optimal Exergy Recovery of Liquefied Natural Gas", Heat and Mass Transfer, 48 (2012) 1309-1317.

· M. R. Salimpour, S. Yarmohammadi, "Effect of Twisted Tape Inserts on Pressure Drop during R-404A Condensation", International Journal of Refrigeration, 35 (2) (2012) 263-269.

· H. Shokouhmand, F. Jam, M. R. Salimpour, "The Effect of Porous Insert Position on the Enhanced Heat Transfer in Partially Filled Channels", International Communications in Heat and Mass Transfer, 38 (8) (2011) 1162-1167.

· H. Ghaedamini, M. R. Salimpour, A. Campo, "Constructal Design of Reverting Microchannels for Convective Cooling of a Circular Disc", International Journal of Thermal Sciences, 50 (6) (2011) 1051-1061.

· H. Ghaedamini, M. R. Salimpour, A. S. Mujumdar, "The Effect of Svelteness on the Bifurcation Angles Role in Pressure Drop and Flow Uniformity of Tree-Shaped Microchannels", Applied Thermal Engineering 31 (5) (2011) 708-716.

· M. R. Salimpour, M. Sharifhasan, E. Shirani, "Constructal Optimization of the Geometry of an Array of Micro-Channels", International Communications in Heat and Mass Transfer 38 (1) (2011) 93-99.

· M. R. Salimpour, Z. Bahrami, "Thermodynamic Analysis and Optimization of Air-Cooled Heat Exchangers", Heat and Mass Transfer, 47 (2011) 35-44.

· M. A. Akhavan-Behabadi, R. Kumar, M. R. Salimpour, R. Azimi, "Pressure Drop and Heat Transfer Augmentation due to Coiled Wire Inserts during Laminar Flow of Oil inside a Horizontal Tube", International Journal of Thermal Sciences, 49 (2) (2010) 373–379.

· H. Shokouhmand, F. Jam, M. R. Salimpour, "Simulation of Laminar Flow and Convective Heat Transfer in Conduits Filled with Porous Media using Lattice Boltzmann Method", International Communications in Heat and Mass Transfer, 36 (2009) 378-384.

· H. Shokouhmand, F. Jam, M. R. Salimpour, "Optimal Porosity in an Air Heater Conduit Filled with a Porous Matrix", Heat Transfer Engineering, 30 (5) (2009) 375-382.

· M. R. Salimpour, "Heat Transfer Coefficients of Shell and Coiled Tube Heat Exchangers", Experimental Thermal and Fluid Science, 33 (2) (2009) 203-207.

· M. A. Akhavan-Behabadi, M. R. Salimpour, V. A. Pazouki, "Pressure Drop Increase of Forced Convective Condensation inside Horizontal Coiled Wire Inserted Tubes", International Communications in Heat and Mass Transfer, 35 (9) (2008) 1220-1226.

· M. R. Salimpour, "Heat Transfer Characteristics of a Temperature-Dependent-Property Fluid in Shell and Coiled Tube Heat Exchangers", International Communications in Heat and Mass Transfer, 35 (9) (2008) 1190-1195.

· H. Shokouhmand, M. R. Salimpour, M. A. Akavan-Behabadi, "Experimental Investigation of Shell and Coiled Tube Heat Exchangers Using Wilson Plots", International Communications in Heat and Mass Transfer, 35 (2008) 84-92.

· A. Feiz-Dizaji, M. R. Salimpour, F. Jam, "Flow Field of a Third-Grade Non-Newtonian Fluid in the Annulus of Rotating Concentric Cylinders in the Presence of Magnetic Field", Journal of Mathematical Analysis and Applications, 337 (2008) 632-645.

· H. Shokouhmand, M. R. Salimpour, "Entropy Generation Analysis of Fully Developed Laminar Forced Convection in a Helical Tube with Uniform Wall Temperature", Heat and Mass Transfer, 44 (2) (2007) 213-220.

· H. Shokouhmand, M. R. Salimpour, "Optimal Reynolds Number of Laminar Forced Convection in a Helical Tube Subjected to Uniform Wall Temperature", International Communications in Heat and Mass Transfer, 34 (2007) 753-761.

· M. A. Akavan-Behabadi, M. R. Salimpoor, R. Kumar, K. N. Agrawal, "Augmentation of Forced Convection Condensation Heat Transfer Inside a Horizontal Tube Using Spiral Spring Inserts", Journal of Enhanced Heat Transfer, 12 (4) (2005) 373-384.

مقالات کنفرانسی (فارسی)

1- دلیر منبری، سحر مومنی، علی اکبر عالم رجبی، محمدرضا سلیم پور، "مدل سازي پيگ ساده و دنبلي شكل درون لوله"، چهارمين كنفرانس لوله و خطوط انتقال نفت و گاز، مهر 1391، تهران، ایران.

2- دلیر منبری، محمدرضا سلیم پور، علی اکبر عالم رجبی، "طراحي ساختار مجراهاي درختي براي خنك كاري قطعات الكترونيكي رينگي با استفاده از تئوري ساختاري"، كنفرانس بين المللي مهندسي مكانيك و فن آوريهاي پيشرفته، مهر 1391، اصفهان، ایران

3- مرتضی شریف حسن، محمدرضا سلیم پور، منصور طالبی، "بهينه سازي هندسي ميكروكانال هاي جاذب حرارت به كمك تئوري ساختاري"، بيستمين همايش سالانه بين المللي مهندسي مكانيك، اردیبهشت 1391، شیراز، ایران.

4- جلال دارابي، محمدرضا سليم‌پور، "بهينه‌سازي نسبت طولي براي پره‌هاي داخل لوله توسط تئوري ساختاري"، نوزدهمين همايش سالانه مهندسي مکانيک، 29-31 ارديبهشت 1390، دانشگاه بيرجند، ايران

5- محمدعلي زاهدي، علي عبد اللهي، محمدرضا سليم پور، محمد جواد خيامي، "بازيابي انرژي گاز طبيعي مايع شده توسط يک سيکل ترکيبي توربين گاز - پيل سوختي اکسيد جامد"، نوزدهمين همايش سالانه مهندسي مکانيک، 29-31 ارديبهشت 1390، دانشگاه بيرجند، ايران.

6- محمدعلي زاهدي، محمدرضا سليم پور، علي عبد اللهي، " بررسي ترمواقتصادي يک سيکل ترکيبي جهت بازيابي انرژي و اگزرژي گاز طبيعي مايع شده"، نوزدهمين همايش سالانه مهندسي مکانيک، 29-31 ارديبهشت 1390، دانشگاه بيرجند، ايران.

7- محسن درخشان، محمدرضا سلیم پور، "مميزي انرژي نيروگاه حرارتي شهيد سليمي نكا و ارائه ي راهكارها و نتايج حاصل شده از مميزي انرژي"، دومين كنفرانس سراسري اصلاح الگوي مصرف انرژي الكتريكي، اسفند 1389، اهواز، ایران.

8- فريد فضل‌اللهي، علي‌اکبر عالم‌رجبي، محمدرضا سليم‌پور، "بررسي تجربي تأثير ميدان الکتريکي بر انتقال گرما درون محفظه‌هاي پره‌دار"، هجدهمين همايش سالانه بين‌المللي مهندسي مکانيک، 21-23 ارديبهشت 1389، دانشگاه صنعتي شريف، تهران، ايران.

9- علي عبدالهي، علي اكبر عالم رجبي، محمد رضا سليم پور، صادق مطهر، "بررسي عملكرد اگزرژي و آلايندگي يك نيروگاه تركيبي توربين گاز - پيل سوختي اکسيد جامد" اولين کنفرانس انرژي‌هاي تجديدپذير و توليد پراکنده ايران، 18-20 اسفند 1388، دانشگاه بيرجند، ايران.

10- حسنعلي قائداميني، محمدرضا سليم‌پور، "طراحي و بهينه سازي آيروديناميكي بدنه يك خودروي هيبريدي تك نفره همراه با اعتباردهي نتايج CFD به وسيله بدنه مرجع" هفدهمين کنفرانس سالانه (بين‌المللي) مهندسي مکانيک، 29-31 ارديبهشت 1388، دانشگاه تهران، ايران.